Damage Prevention Guide to Synthes Drill Bits and Avoiding Bone Necrosis

When it comes to repairing a fracture, many options are available to treat it. Although the procedure is complicated, various techniques and innovative products are used to treat them effectively. Among these, there are the synthes plates available for optimal support for the bones to heal them. These plates are also designed to meet various requirements as per the anatomy of the bones. But before these are deployed at the site, one must know that about the equipment to drill into the bones for placing the screws.

For this, the Synthes Drill Bits are used and can be very effective. But using damaged equipment can lead to bigger damage and even lead to bone necrosis. Here are a few points to help you prevent this situation:

• Avoid drilling into metal: This is the first precaution to be taken to ensure the good condition of the bit. Do not check it against the metal or try to sharpen it; this might damage it even more.

• Use a drill guide and store the bits carefully: Another precaution is using a drill guide for the procedure. This ensures that the drill direction is controlled and avoid bending of the tip.

• Keep the protective cap in place: These always come with a protective cap and hence should be kept with the cap to ensure the safety of the drill bit. Also, remember to remove the cap before sterilization.

These are the three points to help prevent the Synthes Drill Bits from getting damaged. Follow these necessary things to ensure that everything is kept safe and the damage is reduced to minimal.